Your one-stop web resource providing safety and security information to manufacturers

There is now an effective invisibility cloak that is thin, scalable and adaptive to different types and sizes of objects.

A new approach to cloaking surrounds an object with small antennas that collectively radiate an electromagnetic field, said University of Toronto Edward S. Rogers Sr. Department of Electrical & Computer Engineering Professor George Eleftheriades and PhD student Michael Selvanayagam, who designed and tested the system. The radiated field cancels out any waves scattering off the cloaked object.

Weaving Batteries into Clothes
Wireless Power Transfer for Vehicles
Electric Flame Cleans Up Power Plants
Crystal Advance for Solar Cell Efficiency

“We’ve taken an electrical engineering approach, but that’s what we are excited about,” Eleftheriades said. “It’s very practical.”

Picture a mailbox sitting on the street. When light hits the mailbox and bounces back into your eyes, you see the mailbox. When radio waves hit the mailbox and bounce back to your radar detector, you detect the mailbox. Eleftheriades and Selvanyagam’s system wraps the mailbox in a layer of tiny antennas that radiate a field away from the box, cancelling out any waves that would bounce back. In this way, the mailbox becomes undetectable to radar.

Schneider Bold

“We’ve demonstrated a different way of doing it,” Eleftheriades said. “It’s very simple: instead of surrounding what you’re trying to cloak with a thick metamaterial shell, we surround it with one layer of tiny antennas, and this layer radiates back a field that cancels the reflections from the object.”

Their experimental demonstration effectively cloaked a metal cylinder from radio waves using one layer of loop antennas. The system can scale up to cloak larger objects using more loops, and Eleftheriades said the loops could end up becoming printed and flat, like a blanket or skin. Currently researchers must manually attune the antenna loops to the electromagnetic frequency they need to cancel, but in future they could function both as sensors and active antennas, adjusting to different waves in real time, much like the technology behind noise-cancelling headphones.

Work on developing a functional invisibility cloak began around 2006, but early systems were necessarily large and clunky. If you wanted to cloak a car, for example, in practice you would have to completely envelop the vehicle in many layers of metamaterials in order to effectively “shield” it from electromagnetic radiation. The sheer size and inflexibility of the approach makes it impractical for real-world uses. Earlier attempts to make thin cloaks were not adaptive and active, and could work only for specific small objects.

Beyond obvious applications, such as hiding military vehicles or conducting surveillance operations, this cloaking technology could eliminate obstacles—for example, structures interrupting signals from cellular base stations could end up cloaked to allow signals to pass by freely. The system can also alter the signature of a cloaked object, making it appear bigger, smaller, or even shifting it in space. And though their tests showed the cloaking system works with radio waves, re-tuning it to work with Terahertz (T-rays) or light waves could use the same principle as the necessary antenna technology matures.

“There are more applications for radio than for light,” Eleftheriades said. “It’s just a matter of technology, you can use the same principle for light, and the corresponding antenna technology is a very hot area of research.”

Pin It on Pinterest

Share This