Your one-stop web resource providing safety and security information to manufacturers

This fail-safe exit is equipped with a 1.1 watt LED lamp, a three-hour runtime and self-diagnostic system during power failures.

Larson Electronics LLC released an explosion proof LED exit sign light with a remote head approved for use in Class I, Class II and Class III locations.

This emergency fixture produces 99 lumens and operates for at least 90 minutes during a power outage, making this exit system ideal for emergency fail-safe lighting in national and overseas applications where explosion proof fixtures are required.

The EXP-EMG-EXT-LE6-1L-IAE from Larson Electronics is an explosion proof emergency LED exit sign that includes an LED exit sign equipped with a 1.1-watt LED lamp, an emergency battery backup and self-diagnostic system. The EXP-EMG-EXT-LE6-1L-IAE is a single sided exit sign with 4-inch letters that comes in English or Indonesian for overseas applications. The backlit LED array contains eight LEDs to illuminate the exit sign for easy identification.

Cyber Security

This emergency exit unit features self-testing and a backup emergency battery for fail-safe reliability, which will run for a minimum of 3 hours after a power failure with the help of a 3.6-volt NiCad chargeable battery. The battery requires just 24 hours to fully recharge and is completely maintenance free with a life expectancy of 15 years. The emergency battery includes a low voltage disconnect to protect deep discharge and damage if voltage drops below normal load.

This explosion proof emergency LED exit sign includes brown-out, short circuit and voltage surge protection. The EXP-EMG-EXT-LE6-1L-IAE is designed for surface mounting and made of copper-free aluminum. The fixture operates on 240V AC at 50Hz and is rated for Class I, Divisions 1 & 2, Groups A, B, C, D, Class I, Zones 1 & 2, Groups IIB+H2, Class II, Divisions 1 & 2, Groups E, F, G and Class III Divisions 1 & 2 hazardous areas.

Pin It on Pinterest

Share This