The PSR-MXF multifunctional safety relay is the latest addition to the Phoenix Contact PSR safety relay line.
The goal of this relay is to help small and medium machine builders reduce cost and save space. The PSR-MXF accepts up to three dual-channel safety sensors: Two local, independent sensor circuits, as well as an overriding safety circuit useful for simultaneous shutdown. With this safety circuit, one safety relay can do a job that would otherwise require three safety relays or a configurable safety relay.
The PSR-MXF closes the gap between two traditional types of safety solutions. Some engineers achieve emergency shutdown by wiring several safety sensors in-series into a single relay. Though this design is inexpensive and simple, it results in a loss of diagnostic capabilities and can mask critical safety faults in the system. A more comprehensive solution is to individually wire sensors to relays or to use configurable safety systems; however, conventional safety relays are often expensive, and configurable systems are often over-dimensioned. With the PSR-MXF, engineers achieve the advanced safety capabilities at a competitive price point.
At 22.5 mm, the PSR-MXF has a safety rating of SIL 3, Category 4 and PLe. Also, the PSR-MXF requires zero software or turnstile configurations, as it depends on simplified, wire only configurations. The relay is available in four different types of connection technology, including push-in technology.
Click here for more information from Phoenix Contact.