While their stories and circumstances may differ, but the cause of death is the same – electrocution, and it didn’t need to be that way.
To that end, one worker fell victim in Missouri on Oct. 4 when a 40-year-old electrical contractor replacing light fixtures in Sedalia died. On Sept. 23, a 22-year-old worker cleaning a Higbee pig barn with a pressure washer fell victim. In Wichita, Kansas, a 41-year-old worker doing heating and air conditioning work on July 13, and a month earlier, a 35-year-old electrical contractor climbing a pole in Lawrence, Kansas, on June 8.
Nationally, the Bureau of Labor Statistics reports a 3.75 percent increase – 166 workplace deaths related to electrocution – in 2019 over the previous year. From Nov. 6, 2018, through Oct. 3, 2021, OSHA investigated 12 electrical-related deaths in Missouri and Kansas.
“Recent tragedies in Missouri and Kansas are reminders of the danger of electrical exposures in the workplace,” said OSHA’s Acting Regional Administrator Billie Kizer in Kansas City, Missouri. “OSHA’s electrical standards are designed to protect employees from electric shock and electrocution. Employers should implement safety and health programs, and are required to train workers on identifying hazards and use required protective measures to ensure all employees end each workday safely.”
OSHA also has a local emphasis program in the St. Louis area for electrical hazards in industry and an alliance agreement to promote electrical safety with the Iowa Department of Workforce Development and the International Brotherhood of Electrical Workers 55.


Users vs. Trades face different types of hazardous exposures.
Either group is affected by equipment failure of lack of maintenance.
Trades also are affected by Safe Working Procedures and necessary and adequate PPE. Trades do have to perform work on or near energized equipment and subsequently need proper training and adherence to safe work practices. PPE should not be relied upon for mitigating electrocution hazards when engineering controls are practicable to do so, such as guarding, recessing, covering, or otherwise providing ingress protection to energized live parts.
Each group faces different issues and exposure. Unqualified persons should never work on anything electrical unless put to a zero energy state via a LOTO procedure by a qualified person. The qualified person also has to VERIFY by testing, that energy is off. Unqualified persons should never do this since the circuit is assumed to be energized until verification is done. Another action is to employ positive drive and RATED disconnecting devices. Not all devices are rated as disconnects.
User equipment, such as electrically powered devices, tools, cords, etc. need to have robust inspections and be part of overall general safety inspections. Faulty and damaged equipment execrates exposure to hazards and greatly increases the probability of electrocution.
All electrical equipment and installations need to be inspected by qualified and certified persons for compliance to standards when first constructed. Utilization equipment should be inspected to nationally recognized standards by those qualified to do so, such as done by Nationally Recognized Testing Laboratories (NRTL) and documented and labeled.