The Callaway Energy Center resumed generating electricity Monday after a 23-day outage caused by a dislodged vent louver.

The plant’s nuclear reactor was not involved in the incident, which occurred on the main electrical power cable leading from the plant.

CT Nuke Back Up
Electrical Fault Shuts CT Nuke
WI Nuke Faces More Fed Oversight
Arkansas Nuke Up and Running

Ameren Missouri officials reported the electrical fault in the plant’s main electrical power cable leading from the plant was the result of a ventilation louver that had dislodged and came into close proximity of the main electrical cable carrying current generated by the plant to power lines leading from the plant.

Metal from the ventilation louver was close enough to the generating cable to cause electricity to arc to the louver, creating a flash that resulted in temporary closure of the nuclear power plant.

Schneider Bold

After the power disruption, normal operating safety procedures caused the plant’s nuclear reactor to shut down automatically.

Workers disassembled and rebuilt the equipment near the flash incident, located near edge of the plant away from nuclear reactor. During an investigation of the incident, the cause of the arc was the dislodged ventilation louver.

Ameren officials said they inspected the cabling and transformers and they determined the impacts focused just on the local arc flash. Major equipment replacements were not necessary, shortening the time of the plant’s outage.

The plant has two full-time inspectors employed by the Nuclear Regulatory Commission who are on permanent duty at the Callaway Energy Center.

The plant has a 1,190 megawatt nuclear reactor, which heats steam that drives turbines generating about 20 percent of the electricity supplied to Ameren Missouri’s 1.2 million customers.

While the nuclear plant was out of service, electrical power went to the grid by other electrical power plants within the Ameren Missouri system.

Pin It on Pinterest

Share This