American Axle & Manufacturing, the owner of the Colfor Manufacturing plant in Malvern, Ohio, will now have to figure out what to do next after the facility suffered serious damage Tuesday in an early morning blaze at the facility.

Colfor Manufacturing produces automotive parts by cold and warm forging. It specializes in transmission shafts, hypoid drive pinions, propeller shafts, transmission gears and wheel spindles.

Smoke blanketed much of the area, stretching east into the Malvern and then Waynesburg areas, making visibility at some spots nearly non-existent. While the extent of the physical damage was not yet known, firefighters agreed that the impact on the community will be huge.

“It’s going to have an effect. That impact is on our minds and we plan for these things,” said Chief Ralph Castellucci of the Great Trails Fire District in a CantonRep.com report. “This is worst-case scenario right now.”

He said the need for water to fight the fire not only taxed the local water system and the Minerva-area water supply but additional water had to be hauled in.

Schneider Bold

The local school system closed, according to Brown Local Schools’ Facebook page – Hornet Pride – which cited “zero water pressure and concerns over smoke and traffic from the Colfor Fire.”

Firefighters initially were called in because “the press was on fire,” Castellucci said. “Multiple presses were burning. The fire hit the roof and spread out across the building.”

Firefighters from across Carroll, Stark and Columbiana counties came to assist.

Employees, former and current, watched from state Routes 43 and 183 as some employees who’d already arrived to work at the Colfor plant changed into firefighting gear. Many of the employees also work on the local volunteer fire departments.

Firefighters fought an early morning blaze that destroyed much of American Axle & Manufacturing’s Colfor Manufacturing plant.
Source: CantonRep.com


As of 10 a.m., five hours after the fire was called, firefighters were still actively fighting back the fire with some of the roof caving in. Castellucci said no one had suffered an injury.

“We’re going to try to save as much of this facility as we can,” he said. “The deepest part (inside the plant) has given us some problems right now.”

Many employees were inside the plant when the fire broke out. Their numbers were not available as spokespeople for the company could not be reached for comment.

Stephen Imes, who also battled the blaze as a Dellroy firefighter, is also an employee. He was working inside the building early Tuesday morning when he heard there was a fire in the part of the facility holding the presses.

“I (saw) an orange glow and I thought it was them just heating the dies because that’s how we normally heat the dies is with heating torches,” Imes said. “Then it came across the radio that they had a big fire and they called for help.

“So I went out there and the flames were already taller than the press by the time we got out there. So we grabbed fire extinguishers trying to extinguish it. That wasn’t working so everybody just evacuated.”

Investigators are looking into the cause of the blaze.

Pin It on Pinterest

Share This