Oklo Power LLC applied for a license to build and operate the company’s Aurora compact fast reactor in Idaho, federal officials said.

Oklo filed the application March 11, seeking Nuclear Regulatory Commission (NRC) approval of an advanced reactor cooled by a substance other than water. The proposed Aurora design would use heat pipes to transport heat from the reactor core to a power conversion system, which then would be used to generate electricity. The NRC staff began pre-application discussions with Oklo in November 2016.

The NRC staff is determining whether the application has sufficient information to complete the agency’s review.

If the application is determined to be complete, the staff will docket it and publish an opportunity to request a hearing on the Combined License application. Information about Combined Licenses is available on the NRC website.

Schneider Bold

Oklo Power’s parent company, Oklo, is a privately funded, Sunnyvale, California-based company focused on commercializing advanced fission power. The first product from Oklo is the Aurora powerhouse, an advanced fission clean energy plant. Oklo was incorporated in 2013, and has received multiple rounds of private funding.

Safety and defense-in-depth are fundamentally accomplished in the Aurora design including:

  • Small size, low power output, low power density, and low decay heat output
  • Low fuel burnup, small inventory of fuel, and limited available source term
  • Low decay heat term, removed by inherent and passive means
  • High thermal conductivity materials reduce temperature hot spots, and large thermal mass provides capacity for heat dissipation
  • Inherent reactivity feedbacks ensure reactor power is controlled during overpower or overtemperature events
  • Multiple barriers to fission product release
  • High thermal conductivity materials reduce temperature hot spots, and large thermal mass provides capacity for heat dissipation
  • Ambient pressure system removes sources of pressure and limits driving forces for release
  • No use of water cooling, uses dry heat rejection instead

The Aurora produces 4 MWth, which is far smaller than any commercial reactor in the U.S., and smaller even than some research reactors. The lower power of the Aurora also leads to low decay heat production. For reference, 30 seconds after shutdown, the reactor is generating 153 kW of decay heat, 30 minutes after shutdown, the reactor is producing 65 kW of decay heat, one day after shutdown the reactor is producing 21 kW of decay heat, and 1 month after shutdown, the reactor is producing 7 kW of decay heat. This small amount of heat is generated and dissipated in a module that contains tens of tons of metal, and tens more tons of shielding and other structural material.

For comparison, one fuel assembly at Diablo Canyon produces approximately 4 times as much power as the entire Aurora core, and contains approximately 0.5 tons of fuel, cladding, and structural material (or about 0.6 tons when the assembly is immersed in water and the water mass is included).

The application is now available for public review on the NRC website.

Pin It on Pinterest

Share This