A massive fire broke out at a plastics plant in Grand Prairie, Texas, after a power line fell on to a storage area just after midnight Wednesday, officials said.

The fire was extinguished by 7 p.m., almost 20 hours after it started began, said Bill Murphy, assistant chief of the Grand Prairie Fire Department. He said the department is still working to move debris and check for any other spot fires in the area.

The blaze began about midnight at Poly-America when a power line fell onto a storage area containing plastic sheeting, Murphy said. He said a rail car caught on fire and then the blaze spread from there.

There were no injuries in the incident and no one had to evacuate, officials said. The fire was still smoldering early Thursday morning. Initially, officials said the fire could burn for at least two days.

“The flames aren’t as big,” Murphy said early Wednesday, after crews had been battling the blaze for more than eight hours. “Our biggest problem is this is a lot of plastic. It burns very hot. You’ve got to have a lot of foam to put on it. … There’s just not enough foam to put on this large of a fire.”

Schneider Bold

Poly-America produces trash bags and other plastic products and describes itself as “the most technologically advanced and largest recycler and compounder of polyethylene in the world.”

Several fires have broken out at the facility in the past, Murphy said, but none of the magnitude of Wednesday’s blaze.

The company did not respond to requests for comment, though a person who answered the business’s phone Wednesday afternoon said the inquiries would be passed along.

Smoke billows across the Dallas-Fort Worth skyline after a fire at a plastics plant.
Source: Screencapture Via KXAS


Fire officials were concerned that more power lines would fall as the fire continued to burn, but Murphy said no other lines had fallen as of Thursday morning. Oncor shut off the towers in the area shortly after the fire began, and said that other towers in the area had been secured to prevent them from falling.

Murphy said Wednesday the department’s best guess is that the power line that fell was damaged during a storm earlier in the week.

Residents in the area reported sporadic power outages early Wednesday as the fire spread. Oncor said it had rerouted power in the surrounding communities and had restored all individual power outages by noon Thursday.

The company said it was still working with officials to investigate the cause of the fire, and that its crews have been on site with other first responders since the fire started.

“Every indication we have at this time is that our lines were fully intact, above ground and in normal operation at the time the fire started,” Connie Piloto, director of communications for the company, said in a written statement. “The transmission facilities have been mechanically secured to prevent the towers from collapsing … Oncor will continue to keep the site and its surrounding transmission towers de-energized and electrically isolated to prevent any further outage impacts as the damage assessment and repair process continues.”

After the fire erupted, some Poly-America crew members were sent home, but many are still working in the building, Murphy said.

He said the fire is several hundred feet from the rest of the building, so even if the towers do collapse over the next few days, there is enough space between the power lines and the building that it won’t be in any danger.

Pin It on Pinterest

Share This