An advance toward sustainable wireless communication systems means battery-free devices are coming closer to reality.

Through the convergence of two emerging technologies: LiFi and radio frequency (RF) backscatter could give a boost to applications including smart homes, smart cities, and smart agriculture among other sectors, according to a team of researchers, led by Domenico Giustiniano, research associate professor at IMDEA Networks Institute, Madrid.

More than 64 billion IoT devices will end up deployed by 2025, and they will work with batteries.

The chemical components of these batteries threaten to have a huge environmental impact on the Earth. That means there is a pressing need to find a solution to remove the batteries without affecting communication performance and IoT services.

The goal is for IoT devices to operate with the energy provided by Light Emitting Diodes (LEDs) and any other light source, and data provided by modulating these LEDs, a concept called LiFi, and IoT devices will send data back by reflecting and modulating the RF coming signals already present in the environment, a passive and low-energy transmission technique called RF backscatter, according to IMDEA researchers.

Schneider Bold

“Our work opens the door to long-range, battery-free Internet of Things applications retrofitting lighting infrastructure for communication, something that was not previously possible to achieve. It’s the result of three years of research; when we started, LiFi technology and RF backscattering were considered independent technologies, and we have shown that LiFi can solve the limitations of RF backscatter, and that LiFi can be applied to a new field, battery-free communication” Giustiniano said. The IMDEA Networks team (formed by Domenico Giustiniano, Borja Genovés Guzmán, and Muhammad Sarmad Mir) collaborated with Dr. Ambuj Varshney with Uppsala University, and soon to be Assistant Professor at the National University of Singapore.

Sustainable wireless communications took a step closer to reality. Muhammad Sarmad Mir, PhD Student at IMDEA Networks is shown working on the project.
Source: IMDEA Networks Institute


“Solar cells have been widely used to harvest energy. In this work, we go a step further and demonstrate that they can be used efficiently and simultaneously as both a source of power harvesting and as a communications receiver. Our solution solves the trade-off between the captured energy required by the IoT device and the desired data rate, allowing our system to operate without using batteries,” said Guzmán, post-doc researcher at IMDEA Networks and a co-author of a paper on the subject.

The research team demonstrated that power-constrained IoT devices can reach very long-range transmission without affecting their power consumption.

Pin It on Pinterest

Share This