By Gregory Hale
Collecting data and understanding trends and what it all means will help boost decision making when it comes to safety in the chemical industry.

“Parties must work cooperatively together to enable safety improvement,” said Chemical Safety Board (CSB) Chairman Katherine Lemos during her Tuesday keynote address at the virtual 2020 Mary Kay O’Connor Process Safety Symposium. “Success is always dependent on obtaining or deriving safety data to drive decision-making. That decision making can be for making recommendations for investments in new research, for developing new federal regulations or guidance materials or for enhancing training of redesign of a system or process. All these decisions are depending on safety data whether the CEO or front-line operator is making the decision. Even when the desired outcome is efficiency, safety must also be considered.”

Lemos who just took over her duties at the CSB in March talked about her top priorities moving forward:

  1. Focus on the mission
  2. Drive efficiency of operations within the agency
  3. Leverage and strengthen stakeholder relationships

One of the ways she said they were able to strengthen stakeholder relationships was discussing the CSB’s accomplishments from their investigation of the Arkema chemical company’s disaster after Hurricane Harvey.

Schneider Bold

On August 29, 2017, flooding from Hurricane Harvey disabled the refrigeration system at the Arkema plant in Crosby, TX, which manufactures organic peroxides. The following day people within a 1.5-mile radius ended up forced to evacuate. As the trailers holding the chemicals increased in temperature the peroxides spontaneously combusted on August 31. Officials ignited the remaining trailers, on Sunday, September 3. The evacuation zone lifted on September 4. Twenty-one people sought medical attention from exposure to fumes generated by the decomposing products when the vapor travelled across a public highway adjacent to the plant.

New Safety Approach
As a result of the CSB investigation into the incident, they called upon the Center for Chemical Process Safety (CCPS) to create a more robust approach for assessing natural hazards and emergency planning.

“This is exactly the kind of causative safety change that can happen when the CSB and stakeholders work together cooperatively,” Lemos said.

One of the aspects about becoming more data driven, Lemos talked about the types of safety information operators focus on. Things like information front line operators use to make decisions to successfully ensure the safety of an operation.

“Front line operators execute on the mission as defined by the leadership,” she said. “Most people think of operator information as visual or oral information that is presented on computer displays. They may also think about how the systems are designed to communicate and interact with the operator. However, it also extends to other types of operator information such as company and manufacturer policies and procedures. How well operators are trained to use this information and the guidance at their disposal and cultural norms and pressures whether verbal or non-verbal, actual or perceived. Collecting this level of detail and range of operational data is foundational to any big data analysis of safety risk and trends. This drives leadership decisions.”

Lemos then went into a discussion about the Pryor Trust well blowout on January 22, 2018, in Pittsburg County, Oklahoma. The fire killed five workers, who were inside the driller’s cabin on the rig floor. They died from thermal burn injuries and smoke and soot inhalation. The blowout occurred about three-and-a-half hours after removing drill pipe out of the well. The cause of the blowout and rig fire was the failure of both the primary barrier — hydrostatic pressure produced by drilling mud — and the secondary barrier — human detection of influx and activation of the blowout preventer — which were intended to be in place to prevent a blowout.

Changes after Incident
One of the issues was there were no real formal rules and regulations in place to ensure safe operating conditions when things go wrong. Yes, there are some regulations, but not to the point of providing quality information when it is needed the most.

“Without a formal process safety management system, hazards are not identified, ranked or assessed,” Lemos said. “Mitigations are not proposed, or analyzed, much less implemented and the impacts of these hazard and mitigations are not monitored. Data from this information feedback loop is not only vital to maintaining safe operations but it is essential to any big data safety analysis at a company or across the industry.”

Lemos said the CSB wants to create critical safety changes for the industry, including:

  • Driving modernization of process safety regulations
  • Combustible dust safety
  • Emergency planning and response
  • Preventive maintenance
  • Safety hot work practices

“We are driving and creating an even more robust data driven approach to selecting and evaluating our critical drivers,” Lemos said. “Humans need the right information; distilled and easily accessible. It is imperative operations receive relative actionable data about the chemical processes they are operating without informational distractions.”

Pin It on Pinterest

Share This