By Gregory Hale
More details are starting to emerge eight months after the fatal blast at the Yenkin-Majestic Paint facility in Columbus, Ohio, said officials at the Chemical Safety and Hazard Investigation Board (CSB).
CSB officials said they continue to work with Yenkin-Majestic on investigative activities to retrieve physical evidence. While they do that, tank cleaning, waste removal, and demolition activities have been ongoing since the April 8 blast to access key pieces of physical evidence inside the resin plant.
An explosion and fire broke out in the OPC Polymers unit, where 21 employees were in the facility at the time of the incident and the blast killed one worker died and injured nine others in the 12:05 a.m. blast at the paint manufacturing plant.
Yenkin-Majestic provided investigators an overview of the resin manufacturing process, which is called alkyd resin manufacturing utilizing the company’s own technology.
In the process, materials mix in a metallic kettle which contains an agitator and ends up heated by a furnace before it goes to a scale tank and then to product storage. There are six kettles: Four are heated by gas furnaces and two are steam heated. The incident occurred during the batch production in Kettle #3.
Kettle #3 has a rated capacity of 20,900 lbs. and is heated by a gas furnace.
Investigators accessed Kettle 3’s manway cover last week for the first time, where the initial flammable vapor release occurred on the night of the incident, the CSB said. Investigators retained the manway lid and rupture disk for further examination.

A fire raged out of control after an explosion at the Yenkin-Majestic Paint facility in Columbus, Ohio, April 8. CSB is continuing its investigation as it gathered more evidence from the blast which originated during a batch process in Kettle #3 in the OPC Polymers unit.
Source: WBNS TV10 screencapture
At the time of the incident, the OPC Polymer unit was engaged in normal operations. The material being produced was manufactured in a batch process.
Wendell Light, 44, of Heath, died in the blast. He was found around 9:15 a.m. April 8 and was partially covered in rubble inside the collapsed building, Martin said. He was pronounced dead at the scene.
Light ended up reported missing as the fire continued to burn. At daylight, fire crews were able to locate his body in the rubble. Light was a press room supervisor for Yenkin-Majestic Paint.
The CSB is developing plans to inspect and test some evidentiary items, including electrical components, resin samples, and process equipment, at off-site testing facilities in the coming year. Investigative activities are being conducted via procedures and protocols according to the evidentiary and site control agreement (ESCA) between Yenkin-Majestic, OSHA, and the CSB.
Most of the resin plant, except for the structure immediately surrounding Kettle 3, has been demolished. OSHA completed their inspection and posted their press release in October 2021. The Columbus Division of Fire investigators completed their investigation in November 2021. The CSB investigation is ongoing.


It seems that it wasn’t the “explosion” that killed the victim, but the lack of damage limiting construction of the building.
There’s an old bromide about earthquakes. “It’s not the earthquake that kills the victims, but the shoddy building that collapsed on them.”
Damage limiting construction is a “protective” measure since it lessens the severity of the outcome AFTER the incident occurred, as opposed to Prevention, that works PRIOR or prevents an outcome. Level of Risk = Likelihood X Severity. Keeping the building intact lessens the Severity of Outcome, thus lessening the overall level of risk
It doesn’t take that much of a pressure gradient to cause walls to blow out and roof to collapse. Just a few inches of water column pressure are often all it takes. Venting panels will prevent over pressurization.
Also, if venting panels were in place, many times they are compromised by unknowing persons who attach equipment to them.