An offshore rig operator, along with its drilling contractor, were conducting completion operations on a well in the Gulf of Mexico this past June when the blind shear rams (BSRs) ended up damaged.

As part of routine operations and regulatory compliance, operators performed a test of the BSRs in which a blowout preventer (BOP) test tool ran.

During this test, the drill pipe ended up inadvertently backed off at a connection above the test assembly as the drill pipe rotated to release the test tool, according to a report with the Bureau of Safety and Environmental Enforcement (BSEE).

When the BSRs closed, the gallon count showed an abnormality, indicating an object was in its path. Upon recovery of the object, there was damage to the test tool as a result of impact from the BSRs.

Schneider Bold

The incident should have been reported to BSEE’s district office immediately after the BSR test, as required by 30 CFR 250.738(i), but operations continued. Days later, the operator notified BSEE of the incident and said they didn’t report the test earlier because the BSRs did not shear the pipe.

Therefore, BSEE recommends operators consider the following:

  • Report all tests of BSRs to BSEE immediately when it impacts an object or fails to close completely on activation
  • In the event of a blind shear closure command that results in the ram block blades contacting shearables and/or non-shearables, immediately plan to pull the stack in order to inspect the ram block and associated blades and fasteners
  • Review and confirm all conditions prior to testing any components of the BOP, and consider a checklist to organize the verification of parameters
  • Note an incident as a significant event in a Well Activity Report (WAR) submitted to BSEE if the BSR impacts an object at any time
  • Confirm all independent, third-party requirements under 30 CFR § 250.732 end up met after the initial closing of a BSR, including, but not limited to, 250.732 (a)(1)(i)

Damage to blind shear ram after closing on the test toolSource: BSEE

Pin It on Pinterest

Share This